Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
Installation manual : Place of installation
2. Where to install my water heater?
In order to replace the magnesium anode, provide a ceiling height of 2.30 m minimum
2.1 Precautions
• Choose a place of installation whose temperature is always between 4°C and 35°C.
• The water heater must be positioned as close as possible to the major draw-off points (bathroom,
kitchen, etc.)
• If it is positioned outside the living area (cellar, garage), the pipes and the safety units (safety unit,
pressure limiter) must be insulated.
• Make provision in the room for ventilation to prevent condensation and corrosion of the water
heater paint.
• Make provision for a space of 40 cm for the periodic maintenance of the heater element.
• In the case of installation above living rooms (suspended ceilings,
attics, etc.), it is ESSENTIAL to make provision for a water collection
tank connected to the drain under the water heater (shower type
tank for example).
• The installation of the water heater requires no fixing. Make sure
to install it on a flat surface
2.2 Specific installation in the bathroom
• Installation outside volumes (NF C 15-100)
If the size of the bathroom does not allow
the heater to be placed outside volumes 1 and 2:
Possible in Volume 2
2.3 Installation
24
Advertenties
Hoofdstukken
Inhoudsopgave
