Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Storage
Always store the device and accessories:
• clean
• dry
• protected against dust
• In the case provided (33)
• out of the reach of children
Troubleshooting
The following table will assist you in fixing faults:
Problem
Device does not start
Device works with interrup-
tions
Poor sawing performance
Saw blade quickly becomes
blunt
The storage temperature for the re-
chargeable battery and the device is
between 0 °C and 45 °C. Avoid extreme
cold or heat during storage to ensure the
battery output is not adversely affected.
Remove the rechargeable battery from the
device before storing the device (see the
separate operating instructions for the bat-
tery and charger).
Possible cause
Rechargeable battery (29)
not inserted
On/Off switch (2) is broken contact the service centre.
Rechargeable battery (29)
discharged
Defective motor
Internal loose contact
On/Off switch (2) is broken contact the service centre.
Saw blade (16/17) unsuit-
able for the workpiece to be
processed
Saw blade (16/17) blunt
Low battery power
Incorrect sawing speed
Saw blade (16/17) unsuit-
able for the workpiece to be
processed
Too much pressure applied
Sawing speed too high
GB
IE
Troubleshooting
Inserting the battery,
p. 16
Charge the battery (see the
separate operating instruc-
tions for the rechargeable
battery and charger)
contact the service centre.
contact the service centre.
Use a suitable saw blade
(16/17)
Use a new saw blade (16/
17)
Charge the battery (see the
separate operating instruc-
tions for the rechargeable
battery and charger)
Adjust sawing speed
Use a suitable saw blade
(16/17)
Reduce the pressure
Reduce the sawing speed
NI
17
Advertenties
Hoofdstukken
Inhoudsopgave
