Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GB
IE
NI
6. Press the footplate (11) forwards into
one of the notches.
7. Tighten the hexagon socket screws
(10) with the hex key (27).
External dust extraction
Requirements
• The protective cover (21) is mounted.
Connecting external dust extrac-
tion (Fig. E)
1. Disable the dust blower function (9).
2. Connect a suitable dust extraction (not
included) to the suction nozzle (5).
3. If the external dust extractor does not
fit, use the additional reducer (6).
Removing the external dust ex-
traction (Fig. E)
1. Remove the dust extraction from the
suction connector (5) or reducer (6).
2. Remove the reducer piece (6).
Attaching and removing the
protective cover
Attaching the protective cover
1. Press the two holders on the protect-
ive cover (21) into the recesses on the
device housing.
The protective cover clicks into place.
You can fold the fitted protective cover up
by 90°.
Removing the protective cover
1. Carefully press the two holders on the
protective cover (21) apart.
2. Pull the protective cover to the front.
Attaching and removing the
splinter guard
Attaching the splinter guard
1. Press the tension tear protection (25)
into the recess (24) in the slide shoe
(8).
14
Removing the splinter guard
1. Press the tension tear protection (25)
out of the recess (24) in the slide shoe
(8).
Attaching and removing the
line guide adaptor
The line guide adaptor (19) lets you align
better with the drawn cutting lines.
Requirements
• The slide shoe (8) is mounted.
Attaching the line guide adaptor
1. Press the line guide adaptor (19) from
above against the front of the footplate
(11).
The line guide adaptor snaps into the
recesses in the slide shoe (8).
Removing the line guide adaptor
1. Remove the line guide adaptor from
the recesses in the slide shoe (8).
2. Pull the line guide adaptor (19) up-
wards.
Checking the battery charge
level
LEDs
red, orange, green Battery charged
red, orange
red
1. Press the button (31) next to the
charge level indicator button (30) on
the battery (29).
The LEDs of the charge level indicator
show how much charge remains in the
battery.
2. Charge the battery (29) when only the
red LED on the charge level indicator
(30) is illuminated.
Charging the battery
See also the charger instruction manual.
Meaning
Battery partially
charged
Battery needs to be
charged
Advertenties
Hoofdstukken
Inhoudsopgave
