Installing the refrigerator
5
Installing the refrigerator
!
CAUTION! Health hazard
To avoid a hazard due to instability of the device, it must be fixed in
accordance with the instructions.
You find the instructions for changing the door stop and the decorative
plate online at:
http://qr.dometic.com/berFOL
5.1
Preparing the installation
A
NOTICE!
• The refrigerator may not be installed in the rear of mobile homes with
the door pointing in the direction of travel.
• Use exclusively original Dometic ventilation grills to ensure safe
operation.
When installing the refrigerator, note the following:
• To enable the refrigerant to circulate properly, the refrigerator may not exceed an
angle of 3°.
Park the vehicle horizontally for this purpose.
• The refrigerator must be installed so that
– it is easily accessible for service work
– easy to de-install and install
– can be easily removed from the vehicle
• The refrigerator must be installed with a minimum distance of 5 mm from the floor
to ensure that the door can be opened properly (fig. 1, page 3).
– The refrigerator must rest completely on the floor of the furniture up to the
front edge of the door (B).
– Avoid placing the refrigerator directly on the floor.
– Ensure that no carpets interfere with the free movement of the door.
• Ensure that no heat-sensitive components are placed in the area of the gas
burner, such as cables, cable ducts, etc.
• The refrigerator must be installed in a recess so that it stands firm when the vehicle
is in motion. Note the dimensions in fig. 2, page 4 for this purpose.
16
RML10.4, RML10.4S, RML10.4T
EN