Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
en Basic settings
Programme Food
P06
Potatoes
P07
Vegetables
Cooking food with the automatic programmes
1.
Weigh the food.
You require the weight in order to set the pro-
gramme.
Place the food on microwave-safe cookware and
2.
cover with a lid.
9 Basic settings
You can configure the appliance to meet your needs.
9.1 Changing basic settings
Requirement: The appliance is switched off.
Press and hold
and
1.
a The display shows the first basic setting.
Press
.
2.
a The current value flashes on the display.
Use the settings area to set the required value.
3.
Press
.
4.
a The appliance implements the setting.
Press
.
5.
Tip: The setting can be changed at any time.
9.2 Changing the signal duration
When your appliance is switched off, you hear an aud-
ible signal. You can change the duration of the signal.
Press and hold
for approx. six seconds.
▶
a The signal duration switches between short and
long.
a The appliance applies the signal duration and dis-
plays the time.
10 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
10.1 Cleaning products
Only use suitable cleaning agents.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
30
Cookware
Weight range
in kg
With lid
0.15–1.00
With lid
0.15–1.00
for a few seconds.
Information
¡ For boiled potatoes, cut fresh potatoes into small,
equally sized pieces.
¡ Add one tablespoon of water and a little salt for every
100 g boiled potatoes.
¡ Weigh fresh, washed vegetables scales.
¡ Cut the vegetables into small, uniform pieces.
¡ Add one tablespoon of water for every 100 g boiled
potatoes.
Add the volume of water in accordance with the
3.
manufacturer's instructions on the packaging.
Once the programme has finished, stir the food
4.
again.
The food should be left to stand for an additional 5
5.
to 10 minutes until it reaches a uniform temperature.
The cooking results are dependent on the food
quality and consistency of the food.
9.3 Setting the time
Note: After connecting the appliance to the power or
following a power cut, a signal sounds and several
zeros are shown on the display. It may take a few
seconds until a signal sounds and you can set the
time.
Requirements
¡ An audible signal sounds.
¡ 12:00 is shown on the display.
¡ The indicator light lights up via
Set the time via the settings area.
1.
Press
.
2.
9.4 Hiding the clock
To reduce the standby consumption of your appliance,
you can hide the clock.
Press
.
1.
Press
.
2.
To view the clock, press
.
again.
Advertenties
Hoofdstukken
Inhoudsopgave
