en Memory
6.3 Testing cookware for microwave
suitability
Test cookware to see whether it is suitable for mi-
crowave use. Testing cookware is the only time the ap-
pliance should be operated in microwave mode without
any food inside.
WARNING ‒ Risk of scalding!
The accessible parts of the appliance become hot dur-
ing operation.
Never touch these hot parts.
▶
Keep children at a safe distance.
▶
Place the empty cookware in the cooking compart-
1.
ment.
Set the appliance to the maximum microwave power
2.
setting for 30 seconds to 1 minute.
Start the operation.
3.
Check the cookware several times:
4.
– If the cookware is cold or warm to the touch, it is
suitable for microwave use.
– If the cookware becomes hot or sparks are cre-
ated, stop the cookware test. The cookware is
not microwave-safe.
6.4 Configuring the microwave settings
ATTENTION!
Operating the appliance without food in the cooking
compartment may lead to overloading.
Do not switch on the microwave unless there is food
▶
inside. The only exception to this rule is when per-
forming a short cookware test.
7 Memory
You can use the memory function to save the setting
for a dish and call it up again at any time.
Tip: If you prepare one dish often, use the memory
function.
7.1 Saving memory settings
Note:
¡ You cannot save several microwave power settings
in succession.
¡ You cannot save any automatic programmes.
Press
.
1.
a The indicator light lights up via
Use the buttons to set the required microwave
2.
power setting.
a The indicator lamp above the button lights up and
the display shows 1:00 min.
Use the settings area to set the required cooking
3.
time.
28
.
Tip: To ensure optimum use of your appliance, you can
refer to the information in the recommended settings.
→ "How it works", Page 34
Follow the safety instructions. → Page 22
1.
Read the safety instructions and the section on how
2.
to prevent material damage. → Page 24
Read the information on microwave-safe cookware
3.
and accessories. → Page 27
Use the buttons to set the required microwave
4.
power setting.
Use the settings area to set the required cooking
5.
time.
Note: If you open the cooking compartment door dur-
ing operation, the microwave interrupts the operation
and pauses the set time that is counting down. When
you close the cooking compartment door, the opera-
tion continues.
6.5 Changing the cooking time
You can change the cooking time at any time.
Use the settings area to set the required cooking
▶
time.
6.6 Pausing operation
Press
or open the appliance door.
1.
a The indicator light lights up via
To continue the operation, close the appliance door
2.
and press
.
6.7 Cancelling the operation
Press
twice or open the door and press
▶
If required, select one of the options:
4.
To save the memory and immediately start, press
‒
.
To save the memory and not start, press
‒
a If the appliance does not start, the time appears on
the display and the appliance saves the setting.
7.2 Starting the memory
It is very easy to start the saved programme. Place
your dish in the appliance and close the appliance
door.
Press
.
1.
a The saved settings are displayed.
Press
.
2.
7.3 Pausing operation
Press
or open the appliance door.
1.
a The indicator light lights up via
.
once.
.
.