Explanation Of Functions; Channel Indicator Lamps - Becker Centronic EasyControl EC5410-II Montage- En Gebruiksaanwijzing

Verberg thumbnails Zie ook voor Centronic EasyControl EC5410-II:

Inhoudsopgave

Advertenties

Beschikbare talen

Explanation of functions

Channel

The channel of a transmitter can be programmed into one or more receivers.

One receiver is operated through an individual command, several receivers

through a group command.

Central command

If all the channels of the transmitter are selected, it is possible to operate all of

the assigned receivers/groups simultaneously.

Channel selection button

Up to 10 channels can be selected using the channel selection button. The in-

dividual channels are indicated by the corresponding LED lighting up.

Channel

1-5 and central command 1-5

6-10 and central command 6-10

1-10 central command

You can make a note of the programmed channel in the la-

belling field underneath the transparent film. If you keep the

channel selection button pressed for 3 seconds, the channel

selection sequence will change.

A radio signal is indicated by the corresponding channel indicator lamp light-

ing up. The respective channel indicator lamp flashes while transmitting if the

battery is getting weak. The transmission strength and the radio range de-

crease as battery power declines. If the channel indicator lamp no longer

lights up when a button is pressed, the battery must be replaced.

16 - en

LED colour

green

red

orange

Inhoudsopgave

Advertenties

Inhoudsopgave