Download Inhoudsopgave Inhoud Print deze pagina

Safety Instructions; Intended Use - Becker Centronic EasyControl EC5410-II Montage- En Gebruiksaanwijzing

Verberg thumbnails Zie ook voor Centronic EasyControl EC5410-II:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

General information
• Please keep the instruction manual safe!
• Only use in dry rooms.
• Only use unmodified original parts from the control unit manufacturer.
• Keep children away from control units.
• Observe all pertinent country-specific regulations.
• Dispose of used batteries properly. Only replace the battery with one of
the same type (see Technical Data).
Caution
Keep people out of the system's range of travel.
If the system is controlled by one or more transmitters,
the system's range of travel must always be visible during
operation.
Device contains small parts that can be swallowed.
The transmitter described in these instructions must only be used for operat-
ing Centronic-compatible radio drives and radio control units.
• Please note that radio-controlled systems may not be used in areas with
a high risk of interference (e.g. hospitals, airports).
• The remote control is intended solely for use with equipment and sys-
tems in which malfunctions in the transmitter or receiver would not pose
any risk to persons, animals or property, or which contain safety devices
to eliminate such risks.
• The operator is not protected from interference from other telecommu-
nications systems and terminal equipment (e.g. even from radio-con-
trolled systems which are properly operated in the same frequency
range).
• Only connect radio receivers to devices and systems approved by the
manufacturer.
Ensure that the control unit is not installed or operated
close to metal surfaces or magnetic fields.
Radio-controlled systems transmitting on the same fre-
quency may cause reception interference.
Note that the range of the radio signal is limited by legis-
lation as well as by design.
14 - en

Safety instructions

Intended use

Advertenties

Inhoudsopgave
loading

Inhoudsopgave