Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
10. Troubleshooting
Symptom
Check
There is a contact fault in
the contact terminals.
Is the charging connector
on the battery pack wet?
Both side lamps are flashing
simultaneously.
The battery charger
emits abnormal noises,
foul odors or smoke.
It is normal for the battery
The battery charger
charger to become some-
becomes hot.
what warm during charging.
Has the charger plug been
unplugged or the battery
pack removed during char-
After charging, none of the
ging?
battery capacity indicator
lamps light up when the
battery capacity indicator
Did you start charging with
button
is pressed.
the battery pack at a high
temperature, such as
immediately after use?
After disconnecting the charging
plug on the battery charger
Is the charging connector
from the battery pack, the bat-
on the battery pack wet?
tery capacity indicator lamps
continue to light.
80
User manual English
All manuals and user guides at all-guides.com
Action
Remove the battery pack from the battery
charger, mount the battery on the bicycle
and press the power switch of display
unit. When the charging plug reconnected
into the battery pack, if lamps still flash
simultaneously, there might be a fault in
the battery charger.
Clean the charging connector and
charging plug, and dry them. After that,
connect the charging plug to the charging
connector.
The battery pack protection feature has
been activated and the system cannot
be used. Replace the battery pack at an
authorized dealer as soon as possible.
Unplug the charger plug and immediately
cease operation.
If the battery charger is too hot to be
touched by hand, unplug the charger
plug, wait for it to cool, and consult an
authorized dealer.
Charge the battery pack again.
Move to a location where the battery
temperature can reach the range where
charging is possible (0-30 ˚C), and then
start charging again.
Clean the charging connector and
charging plug, and dry them.
11. Specifications
Range of assist speed
Type
Electric motor
Rated output
Assist power control method
Type/size
Rear carrier battery
Rated voltage
Rated capacity
Applicable type battery
Input voltage
Charger
Maximum output voltage
Maximum output current
Maximum consumed power
0 - 25 km/u
Brushless DC type
250 W
Control method depends on pedaling
torque and bicycle speed
Lithium-ion battery
36 V
13,8 Ah
PASB2
AC 220-240 V/50-60 Hz
DC 42 V
DC 3,6 A
290 VA/163 W (charged at AC 240 V)
NL
EN
81
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
