Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5. Instrument and control functions
If a fault is displayed, have your bicycle inspected by a dealer as soon as possible.
68
User manual English
7. Press the function select switch, and the distance (km or mile)
and speed (km/h or MPH) will begin to flash.
8. Use the assist mode switches (up & down) to switch between
'km & km/h' and 'mile & MPH'.
9. Press the power switch. The settings are saved and this function
is exited.
5.21 Diagnosis mode
The e-bike system are equipped with a diagnosis mode.
When you turn on the power, if there is a malfunction or fault in
the e-bike system, the system notify you of the fault by flashing
the assist mode indicator and the battery capacity
indicator alternately, and displaying 'Er' in the speedometer.
See 'TROUBLESHOOTING' on page 30 regarding symptoms and
remedies for abnormal displays and abnormal flashing.
All manuals and user guides at all-guides.com
6. Battery pack and charging procedure
Battery charger lamp
Charging
plug
Battery
capacity
indicator
Charging connector
6.2 Inappropriate charging environments and solutions
The hot and cold environments described below can cause charging to enter standby mode or suspension
without fully charging the battery.
- Summertime charging standby/suspension
If charging in a location receiving direct summer sunlight or immediately after riding, the battery
charger might enter charging standby mode (all four battery capacity indicator lamps flash slowly). See point
7.5 on page 59. This is to automatically stop charging in order to protect the battery from exceeding the
specified temperature while charging. You can avoid charging suspension by starting to charge with the
battery cold or at a room temperature of 15 – 25 °C. If charging suspension occurs, move the battery
charger to a cool location to reduce the charging standby time.
The battery pack equipped for the Yamaha e-bike systems is a
lithium-ion battery. The lithium-ion battery is lightweight and
offers superior capacity. However, it does have the following
characteristics:
• Its performance decreases in extremely hot or cold
environments.
• It naturally loses its charge.
Charger
• It is necessary to use it several times before its performance
display
stabilizes.
The battery pack for the Yamaha e-bike systems also has an
embedded computer which notifies you of estimated residual
battery capacity and suspected faults via the battery capacity
indicator lamp.
By pressing the battery capacity indicator button, you can display
the residual battery capacity for approximately 5 seconds.
See point 8.2 on page 63 for the estimate of the residual battery
capacity. See point 11.2 on page 68 for information on fault
Power plug
flashing.
6.1 Appropriate charging environments
Battery capacity
For safe and efficient charging, use the battery charger in a
indicator lamp
location that is:
• flat and stable (when on the bicycle)
• free of rain and moisture
• out of direct sunlight
• well-ventilated and dry
• not accessible to children or pets
• temperature between 15 – 25 °C
Battery capacity
indicator button
NL
EN
69
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
