Advertenties
Beschikbare talen
Beschikbare talen
English
RECEIPT OF THE UNIT,
HANDLING AND START
RECEIPT OF THE UNIT
Each product is carefully inspected before
shipment. Upon receipt of the goods, it is
recommended that you check these for any
signs of damage caused during transport. If
there is any damage, report it to the carrier,
who is held responsible for damage during
transport. Typically, the product is packed
for transport on pallets. A protective film is
usually also applied to minimise water infil-
tration.
HANDLING AND UNLOADING
Before unloading the products, ensure that
the handling/lifting device is suited to the
weight and size of the same. For products
transported on pallets, it is recommended
to use a forklift truck.
Lift the unit and put it in place with spacers,
making sure the equipment is suited to the
weight of the unit.
STARTING THE UNIT
Before giving to the product the power
supply, check the following:
• Verify that the input/output connections of
the product are not obstructed.
• Check that all the components of the pro-
duct are securely attached to their seals.
• Manually turn the impellers of each fan to
ensure that they do not rub and do not stick
against the inside structures.
• Verify that all the inspection or access
doors are closed.
ATTENTION!
If the fan inlets or outlets are not connected to
a ducted system, ensure that appropriate pro-
tections are installed before starting the unit.
Check that the electrical connections have been
made correctly, especially the grounding.
IMPORTANT!
The electrical connections must be made by
qualified staff.
DISASSEMBLY AND REASSEMBLY
Before disassembly or reassembly, ensure
the product is isolated from the power
supply to prevent operation of the fans.
Disassembly and reassembly must be car-
ried out by qualified staff as they do not fall
under routine maintenance.
128
Advertenties
