Functions; Channel Control Lights - Becker Centronic EasyControl EC5410-II Montage- En Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor Centronic EasyControl EC5410-II:
- Montage- en gebruiksaanwijzing (44 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Channel
The channel of a handheld transmitter can be programmed into one or several
receivers. One or several receivers are controlled via an individual or group com-
mand respectively.
Central command
If all the transmitter channels are selected, all the assigned receivers/receiver
groups can be controlled simultaneously.
Channel selector button
The channel selector button may be used to select up to 10 channels. Operation
of the individual channels is indicated by the relevant LED lighting up.
Channel
1-5 and central command 1-5
6-10 and central command 6-10
1-10 central command
Note
You can note the programmed channels on the label under the see-
through cover.
If you press the channel selector button for 3 seconds, the order of the
channel selection changes.
Channel control lights
A radio signal is indicated by the respective channel control light being illumi-
nated.
If the battery power decreases, the respective channel control light flashes
when transmitting.
Less battery power results in reduced transmitter power or operating range. If
the channel control light does not illuminate when pressing a button, replace
the battery.
Functions
LED colour
green
red
orange
de
en
fr
nl
15
Advertenties
Inhoudsopgave
