Download Inhoudsopgave Inhoud Print deze pagina

AEG FAVORIT34300IM0 Gebruiksaanwijzing pagina 44

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

44
www.aeg.com
Press and hold Start until the start
indicator starts to flash.
6.2 The water softener
The water softener removes minerals
from the water supply, which would have
a detrimental effect on the washing
results and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
Water hardness
German de-
grees (°dH)
47 - 50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
If you use multi-tablets containing salt
and the hardness of your water is lower
than 21°dH, you can set the lowest water
softener level. It deactivates the salt refill
indicator.
If you use standard detergent or multi-
tablets without salt, set the proper
water hardness level to keep the salt
refill indicator active.
How to set the water softener
level
The appliance must be in programme
selection mode.
French degrees
(°fH)
84 - 90
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. It is important to set the
right level of the water softener to assure
good washing results.
mmol/l
Clarke de-
grees
8.4 - 9.0
58 - 63
7.6 - 8.3
53 - 57
6.5 - 7.5
46 - 52
5.1 - 6.4
36 - 45
4.0 - 5.0
28 - 35
3.3 - 3.9
23 - 27
2.6 - 3.2
18 - 22
1.9 - 2.5
13 - 17
0.7 - 1.8
5 - 12
<0.7
< 5
1. Make sure that the programme
marker on the knob is aligned with
the indicator on/off .
2. To enter the user mode, press and
hold Delay. At the same time turn
the knob counterclockwise until the
programme marker is aligned with
the first programme. Release Delay
when the indicators Start and on/off
start to flash.
3. Press Delay.
• The indicator
• The indicators Start and on/off
continues to flash.
• The intermittent flashing of
refers to the current set level, e.g.
Water softener lev-
el
10
9
8
7
6
1)
5
4
3
2
2)
1
starts to flash.

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave