Download Inhoudsopgave Inhoud Print deze pagina

Parkside Performance PABSP 20 Li C3 Bedienings- En Veiligheidsinstructies pagina 17

Verberg thumbnails Zie ook voor PABSP 20 Li C3:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

4 . Place the battery charger onto the screws
using the openings at the back of the battery
charger . The charging control LEDs (green 
and red 
) have to be located on the lower
[
19 ]
end of the battery charger .
˜ Operation
˜ Attaching/removing the
battery pack
m
CAUTION! RISK OF INJURY!
Always lock the on/off switch 
u
accidental starting by moving the rotation
direction switch 
5 ]
[
(Lock) .
NOTE
When you insert a smart battery pack
u
(model no . PAPS 204 A1, PAPS 208 A1)
into the product and press the on/off switch
for the first time, the connection status
LED 
flashes 3× .
[
12 ]
Removing the battery pack: Press the
o
battery pack release button 
battery pack (Fig . D) .
Attaching the battery pack: Align the
o
battery pack to the handle and slide it into it .
Ensure the battery pack clicks noticeably in
place .
The battery pack can only be inserted into the
product in one direction .
˜ Checking the battery pack
charging level
(Fig . B)
Check battery pack charging level: Press the
o
 button 
. The charging level LEDs 
14 ]
[
light up:
16 GB/IE/NI
[
18 ]
to avoid
6 ]
[
into the centre position
. Remove the
13 ]
[
15 ]
[
LED
Red/orange/green
Red/orange
Red
˜ Charging the battery pack
(Fig . C)
NOTE
The battery pack 
u
any time without reducing its life .
Interrupting the charging process does not
u
damage the battery pack .
Charge the battery pack before operation
o
when it is at medium or low charging level .
The charging control LEDs (green 
o
red  
) indicate the status of the charger 
[
19 ]
and the battery pack:
LED
Red LED lights up
Green LED lights up
Green and red LED
flashing
Red LED flashing
Green LED lights up
(without battery pack)
1 . Insert the battery pack into the charger .
2 . Connect the mains cord with mains plug 
of the charger to the socket-outlet .
3 . When the battery pack is fully charged:
Remove the battery pack from the charger .
Then disconnect the mains plug of the charger
from the socket-outlet .
Charging level
Maximum
Medium
Low
may be charged at
10 ]
[
and
18 ]
[
Status
Battery pack
charges
Battery pack fully
charged
Battery pack
defective
Battery pack too
cold or too warm
Charger ready
17 ]
[
16 ]
[

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Gerelateerde Producten voor Parkside Performance PABSP 20 Li C3

Inhoudsopgave