Download Inhoudsopgave Inhoud Print deze pagina

Setting The Unit And Pressure; Switching The Product On/Off; Switching Off; Removing The Adapter From The Product - Parkside PMK 150 A1 Bedienings- En Veiligheidsinstructies

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

2 . Connect the mains plug 
socket .
DC Connection
1 . Remove the 12 V plug with cord 
the storage compartment for 12 V plug with
cord 
.
11 ]
[
2 . Connect the 12 V plug 
cigarette lighter socket .
˜ Setting the unit and pressure
NOTE
The pressure can be displayed in units of
u
bar, PSI or kPa:
bar: 100 Kilopascal
PSI: Pounds per square inch
kPa: Kilopascal
The pressure value can be changed in
u
0 .05 increments .
The objects you plan to use with the
u
product must be compatible with the air
pressure and flow rate of the product .
Using objects that require higher pressure
or flow than the product can deliver may
result in poor performance or damage to
the objects .
Recommended tyre pressure: Observe
u
the information supplied by the
tyre manufacturer and the vehicle
manufacturer . Do not exceed the
maximum pressure rating .
This product is not calibrated! For a
u
calibrated measurement value, check the
actual tyre pressure using a calibrated
meter after you have inflated the tyres
yourself, e .g . at a petrol station .
1 . Set the desired unit: Press the BAR/PSI/
kPA button 
.
5 ]
[
2 . Set the desired pressure:
Press the + button 
value .
to the mains
16 ]
[
from
12 ]
[
to a 12 V
12 ]
[
to increase the
6 ]
[
Press the − button 
value .
The set pressure value is shown on the
display 
.
[
3 ]
After a few seconds 0.00 is shown on the
display .
˜ Switching the product on/off
Switching on
Move the on/off switch 
o
The display 
shows the current pressure
3 ]
[
value .
The product pumps until the set pressure is
reached .

Switching off

Move the on/off switch 
o
The product stops pumping .
The display 
shows the current pressure
3 ]
[
value .
NOTE
When you remove the compressed air
u
hose 
from the object, the display 
[
13 ]
shows 0.00 .
˜ Removing the adapter from
the product
NOTE
Air may escape from the valve of the
u
inflatable object when removing the
compressed air hose 
the compressed air hose too quickly .
1 . Fold up the clamping lever on the
compressed air hose 
2 . Remove the compressed air hose 
the adapter 
/
7 ]
[
8 ]
[
to decrease the
4 ]
[
to position I .
[
1 ]
to position O .
1 ]
[
[
3 ]
. Do not remove
13 ]
[
.
[
13 ]
with
13 ]
[
/
from the object .
9 ]
[
GB/IE/NI
15

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave