First set-up of the product
Unpacking the product
m
WARNING!
The product and packaging materials are
u
not toys! Children must not be allowed
to play with plastic bags, film and small
parts . There is a risk of swallowing and
suffocation .
1 . Take the product out of the packaging and
remove all packaging materials and plastic
wrappings .
2 . Check to make sure that all listed parts are
included (see "Scope of delivery") .
3 . Check whether the product and all parts
are in good condition, if any damage or
defect is detected, do not use the product,
but follow the procedure described in
chapter "Warranty" .
Operation
m
WARNING!
Wear a dust mask!
Wear eye protection!
Wear hearing protection!
Selecting the adapter
(Fig . C, D, E, F)
1 . Place the product on a stable and flat
surface .
14 GB/IE/NI
2 . Select the desired adapter
depending on the object you want to
inflate:
Adapter
Object to be inflated
Conical
Inflate swimming
adapter
accessories, e .g .:
7 ]
[
o
o
o
Tyre valve
o
adapter
8 ]
[
Ball needle
9 ]
[
o
3 . Remove the compressed air hose
the storage compartment for compressed
air hose
.
[
14 ]
4 . Connect the adapter
compressed air hose
5 . Fold up the clamping lever on the
compressed air hose
6 . Connect the compressed air hose
the adapter
/
[
7 ]
8 ]
[
wish to inflate .
7 . Fold down the clamping lever on the
compressed air hose
Electrical connection
NOTE
During temporary use outdoors: If
u
connected via mains cord
product must be connected to a residual
current circuit breaker with a trigger
current of 30 mA or less .
Verify the socket of the cigarette lighter
u
in your vehicle has an adequately sized
fuse .
AC Connection
1 . Remove the mains cord with mains plug
from the storage compartment for mains
cord
.
15 ]
[
/
/
7 ]
[
8 ]
[
[
9 ]
Paddling pools
Air mattresses
Boats
Bicycle tyres
Balls
from
13 ]
[
/
/
to the
7 ]
[
8 ]
[
[
9 ]
.
13 ]
[
.
13 ]
[
with
13 ]
[
/
to the object you
[
9 ]
to lock it in place .
[
13 ]
, the
[
16 ]
16 ]
[