Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CARE AND CLEANING
• Store in a clean dry place, between 5°F – 131°F (-15°C – 55°C)
• Before moving or transpor�ng the unit, ensure that it is turned off.
• If the instrument is wet, dry off with a dry cloth. Do not seal the laser in
the carrying case un�l completely dry.
• Do not a�empt to dry the instrument with fire or with an electric dryer.
• Do not drop the instrument, avoid rough treatment, and avoid con stant
vibra�on.
• Periodically check the calibra�on of the instrument.
• Clean with a so� cloth, slightly dampened with a soap and water
solu�on. Do not use harsh chemicals, cleaning solvents or strong
detergents.
• Keep the laser aperture clean by wiping it gently with a so� lin�ree cloth.
• Keep the detec�on window of the Laser Detector clean by wiping it with
a so� cloth moistened with glass cleaner.
• Remove ba�eries from the instrument during lengthy periods of
non-use, and store in carrying case.
• Ensure that the tool is turned off before removing ba�eries
HORIZONTAL PLANE CALIBRATION TEST
1. Set up the instrument approximately 150� (50m) from a wall or a
measuring staff.
2. Level the instrument as accurately as possible.
3. Posi�on it so that the X-axis is poin�ng in the direc�on of the
measuring staff or wall.
4. Turn on the tool.
5. Mark the height of the laser beam on the measuring staff or make a
mark on the wall.
6. Rotate the instrument by 180°.
7. Mark the height of the laser beam on the measuring staff or make a
new mark on the wall. The difference between the heights or marks
should not exceed 10 mm.
8. Repeat this procedure for the Y axis.
WARRANTY
This product is warranted by the manufacturer to the original purchaser to
be free from defects in material and workmanship under normal use for a
period of two (2) years from the date of purchase.
During the warranty period, and upon proof of purchase, the product will
be repaired or replaced (with the same or similar model at manufactures
op�on), without charge for either parts of labour. n case of a defect please
contact the dealer where you originally purchased this product. The
warranty will not apply to this product if it has
been misused, abused or altered. Withiut limi�ng the foregoing, leakage
of the ba�ery, bending or dropping the unit are presumed to be defects
resul�ng from misuse or abuse.
22
Advertenties
Inhoudsopgave
