Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION FROM THE REMOTE CONTROL
1. Symbol
mode is on.
2. If a displacement occurs, icons
3. Press bu�on (№4 pic 3) on the remote to switch off a SHOCK WARNING
mode. The tool will automa�cally self-level. Icon
4. To sw�ch SHOCK WARNING mode again, press bu�on (№4 pic.3).
SHOCK WARNING icon
④
INCLINED PLANE (SEMI-AUTO MODE)
A ROTARY 500 HV Servo / ROTARY 500 HVG Servo can project an inclined
plane of (±5%) along the X-axis or Y-axis.
Take this func�on into account when installing the device before it is used.
Use this func�on when crea�ng a manual slope.
OPERATION FROM THE KEYPAD OF THE TOOL
1. Press bu�on (№1 or №2 pic.2) - slope along X axis. Semi-auto mode is
switched on. Indicators (№20 and №22 pic.2) will blink. Indicator (№12
pic.2) of the SHOCK WARNING mode is off.
2. Press bu�ons (№1 or №2 pic.2) to make necessary slope. Leveling along
Y axis will be realized automa�cally.
3. Press manual mode bu�on (№21 pic.2) to exit semi-auto mode.
Indicators (№20 and №22 pic.2) will be off. Automa�c self-levelling is
switched on.
OPERATION FROM REMOTE
1. Press bu�on (№2 or №6 pic.3) - slope along X axis. Semi-auto mode is
switched on. Icon X
WARNING mode will be switched off. Indicator
2. Press bu�ons (№2 or №6 pic.3) to make necessary slope. Leveling along
Y axis will be realized automa�cally.
Indicator Y
bu�on (№7 pic.2) to exit semi-auto mode. Indicators X and Y will
blink off. Automa�c self-levelling is switched on.
INCLINED PLANE (MANUAL MODE)
Rotary laser level can make an inclined plane along one or two X and Y
axis simultaneously. Slope value is ±5º. The �lt angle is created regarding
the axes indicated on the protec�ve cover of the rota�ng laser head (pic.4).
appears on the display of the remote of SHOCK WARNING
will appear on the display of the remote.
will be displayed on the remote control. SHOCK
will appear on the remote display. Press manual mode
will blink on the display.
18
17
will be off.
will blink off.
Advertenties
Inhoudsopgave
