Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
LASER BEAM DETECTOR
Laser detector increases the measurement range of the tool. Use the
detector when the laser beam is poorly visible, e.g. outdoor or in bright
light. When opera�ng with the rod, set the detector on the rod with the
help of mount.
1. Sound On/Off
2. ON/OFF power
3. Line over the Zero level Indicator
4. LED indicator - Zero level
5. Line below the Zero level Indicator
6. LCD display
7. Detector sensor
8. Backlight On/Off
9. Accuracy selec�on bu�on
10. Accuracy icon
11. On/Off backlight symbol
12. On/Off sound symbol
13. Power indicator
14. Up direc�on indicator
15. 0 mark indicator
16. Down direc�on indicator
USING THE LASER DETECTOR
Press the On/Off bu�on (№2 рic.5) to turn on the detector.
Select the measurement mode (№2 рic.5). The symbol of the selected
mode (№10 рic5) will be shown on the display: ±1 mm, ±2.5 mm, ±5 mm.
Select the mute or sound mode (№1 рiс.5). The sound symbol (№12 рiс.5)
will be shown on the display.
Turn the detec�on window (№7 рiс.5) towards the laser beam and move
the detector up and down following the direc�on of the arrow (№14, 16
рiс. 5) on the LCD.
Lower the laser detector (№16 рiс.5) if the arrow points down. You will
hear a sound alarm.
Raise the laser detector if the arrow points up (№14 рiс5.). You will hear a
sound alarm.
The level marks on the sides of the laser detector are leveled with the
laser beam when the mid mark is displayed on the display (№15 рiс.5).
You will hear a con�nuous sound alarm.
21
English
Advertenties
Inhoudsopgave
