Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION FROM THE TOOL KEYPAD
1. Press bu�on (№21 pic.2) to switch the manual mode on. Indicator
(№20 pic.2) of the manual mode is on.
2. Press bu�on (№1 or №2 pic.2) to set the inclina�on along X axis.
Indicator (№22 pic.2) will light up when pressing bu�ons
(№1 or №2 pic.2).
3. Press bu�on (№17 or №18 pic.2) to set the inclina�on along Y axis.
Indicator (№19 pic.2) will be light up when pressing bu�ons
(№17 or №18 pic.2).
4. Press bu�on (№21 pic.2) to exit the manual mode. Indicator (№20 pic.2)
will blink off, automa�c self-leveling will switch on.
OPERATION FROM THE REMOTE CONTROL
1. Press bu�on (№7 pic.3) to switch on the manual mode. Indicator
X
or Y
2. Press bu�on (№5 pic.3) to choose the inclina�on axis. Blinking indicator
X
will appear on the display of the remote control if X axis is
selected. Indicator Y
3. Press bu�ons (№2 or №6 pic.3) to make a necessary inclina�on along
the selected axis.
4. To exit the manual mode press bu�on (№7 pic.3). Indicators X
Y
will blink off. Automa�c self-leveling will be switched on.
SCAN FUNCTION
The scanning func�on is used to improve the visibility of the laser beam
and eliminate interference when several rotary lasers are opera�ng
simultaneously on the same area. The area where the laser beam is visible
is limited. The smaller the scanned object, the be�er it is seen. There are 5
variants of scanning: 0°- 10°- 45°-90°- 180°.
OPERATION FROM THE TOOL KEYPAD
1. Press the Scan bu�on (№5 рiс.2) to switch it on. Indicator (№6 рiс.2)
will light up. First variant of the scanning 0° - laser dot.
2. Press bu�on (№5 рiс.2) to choose the next variant of the scanning:
10°- 45°-90°-180°.
3. The scan mark can be moved around the perimeter. To move in a
clockwise direc�on, press and hold the bu�on (№16 pic.2). Indicator
(№15 pic.2) will light up. To move counterclockwise direc�on, press and
hold bu�on (№3 pic.2). Indicator (№4 pic.2) will light up.
4. If you select the 180 ° scanning variant, then the further pressing the
bu�on (No. 5 Fig. 2) will turn off the scanning mode. Indicator (№6
pic.2) will blink off.
will blink on the display of the remote control.
will blink if Y axis is selected.
11
19
and
English
Advertenties
Inhoudsopgave
