Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5.0 Adjusting the Connecting Frame
Adjustment:
The connecting frame can be extended by approximately
20mm to fit a wheelchair with a wider front frame.
Therefore the 12 allen screws on the top and bottom
cover of the adjuster clamp need to be loosened. The
connecting frame can then be pulled out on both sides,
(Fig.5.1).
CAUTION!
• Ensure that the connecting frame is extended equally
on both sides
• Never extend the connecting frame too far.
• Esure that the ends of the frame tube are within the
"MAX" marking printed on top of the adjuster clamp,
(see Fig.5.2).
Attitude Power Rev.H
Fig.5.1
Fig.5.2
13
Advertenties
Hoofdstukken
Inhoudsopgave
