Download Inhoudsopgave Inhoud Print deze pagina

Installing Drain Piping Of The Outdoor Unit; Forming The Piping - LG PM07SPNSJ Installatiehandleiding

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

INSTALLATIE
24
2
Leg geen afvoerleidingen aan zoals in dit
voorbeeld.
Niet hoger
plaatsen
Water-
lekkage
Uiteinde van afvoerslang
in water ondergedompeld.
Water-
lekkage
Greppel
* De functionaliteit kan worden gewijzigd in
overeenstemming met het modeltype.
Installing drain piping of the
outdoor unit
Depending on installation site, it may be
required to install drain plug for drainage
(Supplied with the unit). In cold areas, do not
use a drain hose with the outdoor unit.
Otherwise, drain water may freeze, impairing
the heating performance.
1
See the figure below for installation of the
drain plug.
A Drain nipple
B Drain cap
C Drain washer
2
Connect a field supplied vinyl hose to the
drain nipple (A). If the hose is too long and
hangs down, fix it carefully to prevent kinks.
• 2.5/3.5/5.0 kW
• 6.6 kW
* The feature can be changed according to
type of model.
Verzameld
afvoerwater
Lucht
Water-
Golfvorm
lekkage
Afstand minder
dan 50mm
A
B
C

Forming the Piping

Form the piping by wrapping the connecting
portion of the indoor unit with insulation material
and secure it with two kinds of vinyl tapes.
- If you want to connect an additional drain
hose, the end of the drain outlet should be
routed above the ground. Secure the drain
hose appropriately.
Drain hose
In cases where the outdoor unit is installed
below the indoor unit perform the following.
1
Tape the piping, drain hose and connecting
cable from down to up.
2
Secure the tapped piping along the
exterior wall using saddle or equivalent.
Seal a small opening
around the pipings
with gum type sealant.
Saddle
Trap is required to prevent water
from entering into electrical parts.
* The feature can be changed according to
type of model.
In cases where the Outdoor unit is installed
above the Indoor unit perform the following.
1
Tape the piping and connecting cable from
down to up.
2
Secure the taped piping along the exterior
wall. Form a trap to prevent water entering
the room.
3
Fix the piping onto the wall using saddle or
equivalent.
Pipe
Vinyl tape(narrow)
Wrap with
vinyl tape(wide)
Connecting cable
Pipings
Taping
Drain hose

Advertenties

Inhoudsopgave
loading

Inhoudsopgave