Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Connecting the Cables
Indoor unit
Connect the cable to the indoor unit by
connecting the wires to the terminals on the
control board individually according to the
outdoor unit connection. (Ensure that the color
of the wires of the outdoor unit and the
terminal No. are the same as those of the
indoor unit.)
Insert the connecting cable through the bot-
tom side of indoor unit and connect the cable.
(1) Open the Decor
(2) Unscrew the screw of C/Box
(3) Slide up the Metal Plate Cover
(4) Connect the connecting cable
(5) After complete connect the cables, should
assemble the Metal Plate Cover by screw.
Decor
* The feature can be changed according a
type of model.
LET OP
!
- The circuit diagram is a subject to
change without notice.
- The earth wire should be longer than the
common wires.
- When installing, refer to the circuit
diagram on the chassis cover.
- Connect the wires firmly so that they
may not be pulled out easily.
- Connect the wires according to color
codes, referring to the wiring diagram.
1(L) 2(N) 3(C)
Power
Power
Power
connecting cable
connecting cable
connecting cable
- Connect the wires to the terminals on the
- Secure the cable onto the control board with
- Use a recognized circuit breaker between
OPMERKING
!
The power cord connected to unit should
be selected according to the following
national wiring regulations. The supply
cords of parts of appliances for outdoor
use shall not be lighter than
polychloroprene sheathed flexible cord.
(code designation 60245 IEC 57, H05RN-F)
LET OP
!
De aansluitkabel die op de binnen- en
buitenunit is aangesloten moet voldoen
aan de volgende technische specificaties
(Deze apparatuur wordt voorzien van een
kabelset die voldoet aan de nationale
regelgeving.)
10±3mm
NORMALE
DWARSDOORSNEDE
GEBIED 1.0mm
Als het stroomsnoer beschadigd is, moet
het worden vervangen voor een speciaal
snoer of assemblage die leverbaar is door
de fabrikant of zijn
servicevertegenwoordiger.
control board individually.
the cord clamp.
the power source and the unit.
A disconnecting device to adequately
disconnect all supply lines must be fitted.
Circuit
2.5/3.5 kW
Breaker(A)
15
INSTALLATIE
21
2
Grade
5.0 kW
6.6 kW
20
25
Advertenties
Inhoudsopgave
