Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ASSEMBLY STEP 3
5
4
7
6
2
16
HARDWARE FOR STEP 3
NOTE: Be
PART
TYPE
careful not
G
WAVY WASHER
17.2X22.5X0.5T
to pinch any
H
FLAT WASHER
16.0X25.0X1.0T
wires while
attaching the
I
FLAT WASHER
console mast.
B
SPRING WASHER
J
BUTTON HEAD BOLT
A
Open HARDWARE FOR STEP 3.
B
Remove PRE-INSTALLED BOLTS AND WASHERS (6)
from MAIN FRAME (2).
G
C
Carefully pull the CONSOLE CABLE (4) through the
H
B
CONSOLE MAST (5) using the twist tie located inside
the CONSOLE MAST (5).
D
Attach CONSOLE MAST (5) to MAIN FRAME (2) using
PRE-INSTALLED BOLTS AND WASHERS (6).
E
Slide WAVY WASHER (G) and FLAT WASHER (H) over
CRANK (7) followed by PEDAL ARM (8) as shown. Rest
I
J
pedal arm wheel on guide rail.
F
Attach the PEDAL ARM (8) to the CRANK (7) using
1 FLAT WASHER (I), 1 SPRING WASHER (B) and 1
8
BOLT (J).
G
Repeat steps E–F on the opposite side of the elliptical.
ASSEMBLY STEP 4
DESCRIPTION
QTY
2
2
8.2X30.0X1.5T
2
8.2X15.4X2.0T
2
M8X1.25PX15L
2
9
K
10
PART
A
B
C
L
K
D
E
I
B
J
HARDWARE FOR STEP 4
TYPE
DESCRIPTION
QTY
K
FLAT WASHER
20.2X27.2X1.5T
4
L
WAVY WASHER
20.7X29.1X0.5T
2
I
FLAT WASHER
8.2X20.0X1.5T
2
B
SPRING WASHER
8.2X15.4X2.0T
2
J
BUTTON HEAD BOLT
M8X1.25PX20L
2
Open HARDWARE FOR STEP 4.
Slide 1 FLAT WASHER (K), 1 WAVY WASHER (L)
and another FLAT WASHER (K) onto the LOWER
LINK ARM (9).
Slide the LOWER LINK ARM (9) into the PEDAL
ARM BRACKET (10).
Attach the LOWER LINK ARM (9) to the PEDAL
ARM BRACKET (10) using 1 FLAT WASHER (I),
1 SPRING WASHER (B) and 1 BOLT (J).
Repeat steps B–D on the opposite side of the
elliptical.
17
Advertenties
Inhoudsopgave
