Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ASSEMBLY STEP 7
13
15
12
20
20
HARDWARE FOR STEP 7
PART
TYPE
M
SCREW
A Open HARDWARE BAG 7.
14
B Slide the right (R) UPPER HANDLEBAR (13) onto
the right LOWER HANDLEBAR (12) making sure
handlebars are joined together completely. Secure
15
the UPPER HANDLEBAR (13) to the LOWER
HANDLEBAR (12) using PRE-ATTACHED SET SCREWS
(14).
C
Slide right (R) HANDLEBAR COVERS (15) over UPPER
HANDLEBARS (13) and attach using 1 SCREW (M).
M
NOTE: Make sure upper handlebars are as far down
as possible. Handlebars can be damaged If not
secured correctly.
D Repeat STEPS B–C on left side.
ASSEMBLY STEP 8
DESCRIPTION
QTY
M4X0.7PX8L
4
17
18
NOTE: All hardware for this step is pre-installed.
A Remove 4 PRE-INSTALLED BOLTS (16) from the
CONSOLE (17).
4
B Attach the CONSOLE CABLES (4) to the
16
CONSOLE (17).
C
Carefully tuck the CONSOLE CABLES (4) into the
CONSOLE MAST (5) before attaching the CONSOLE.
Attach CONSOLE (17) to CONSOLE MAST (5) using
4 PRE-INSTALLED BOLTS (16).
NOTE:
19
5
Do not to pinch any wires while attaching the console.
D
Slide FRONT TOP CAP PIECE (18) and REAR TOP CAP
PIECE (19) over CONSOLE MAST (5) and snap into
place.
21
Advertenties
Inhoudsopgave
