Troubleshooting - Renson CAMARGUE SKYE Gebruikershandleiding

Inhoudsopgave

Advertenties

Beschikbare talen

Problem: The rain sensor doesn't work properly

Solution: The following connections are required for the rain sensor to function properly:

∫ The rain sensor must be connected to one of the Camargue Skye's controls.

∫ One of the Camargue Skye's controls must be connected to the Outdoor Connect with the

Renson network cable.

∫ Outdoor connect does not have to be connected to a router with internet (but it does for wind, snow and frost).

Check whether the rain function is active in the app. You can ﬁnd it in the following menu: Settings ➞ My outdoor ➞ Sensor settings.

With connected elements, the Camargue Skye roof must be active.

Elements

Groups

Scenes

Settings

Contact

You have 4 possible preferred positions for rain:

fully closed roof

extended roof (blades vertical)

roof fully open (blades stacked)

roof closed, blades rotated 2°

2°

You can then test the rain sensor by placing your hand on

the sensor. After a few seconds, the roof should move to the

preferred position. After 30 sec., the surface area of the sen-

sor should be noticeably warmer. In the app, the rain symbol

appears on the control screen of the Camargue Skye roof

element.

As a user, you can stop and take control of the movement

at any time.

158