What To Do If - Becker Centronic VarioControl VC470-II Montage- En Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Problem

Drive is not functioning.

Drive is running in the wrong direc-

tion.

The radio receiver does not perform

manual run commands.

The radio receiver does not perform

automatic run commands.

Intermediate position I / II cannot be

programmed.

Venetian blind tilts in the lower limit

position with a delay.

The shading solution retracts without

a manual or automatic drive com-

mand.

36 - en

What to do if...?

Remedy

Check connection.

Use the direction switch to correct

the running direction.

Program transmitter.

Set the transmitter's slide switch to

Automatic mode.

Delete intermediate position I / II and

reprogram.

Delete intermediate position II.

Set intermediate position I.

Check the radio communication

between the sensor and receiver.

You can extend the shading solution

for one hour in dead-man mode.

Inhoudsopgave

Advertenties

Inhoudsopgave