Deleting Intermediate Position Ii (Tilt Position); Checking Intermediate Position I - Becker Centronic VarioControl VC470-II Montage- En Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Deleting intermediate position II (tilt position)

Move the blind to intermediate position II.

First press and hold the STOP button and, within the next 3 seconds, press

and hold the UP button. Keep both buttons depressed until

▻ the receiver confirms.

► Intermediate position II is now deleted.

Intermediate position I

Intermediate position I is any shading solution position of

your choosing, situated between the upper and lower limit

positions. Both limit positions must be set before intermedi-

ate position I is set.

Intermediate position I is approached from the upper limit

position.

Programming intermediate position I

Move the blind from the upper limit position to the desired intermediate posi-

tion I.

First press and hold the STOP button and, within the next 3 seconds, press

and hold the DOWN button. Keep both buttons depressed until

▻ the receiver confirms.

► Intermediate position I is now saved.

Press the DOWN button twice within one second.

► The blind moves to intermediate position I.

31 - en

Inhoudsopgave

Advertenties

Inhoudsopgave