Download Inhoudsopgave Inhoud
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. Becker Handleidingen
  4. Ontvangers
  5. Centronic VarioControl VC470-II
  6. Montage- en gebruiksaanwijzing

Programming The Intermediate Positions I + Ii; Setting The Intermediate Position I; Checking The Intermediate Position I; Deleting The Intermediate Position I - Becker Centronic VarioControl VC470-II Montage- En Gebruiksaanwijzing

Verberg thumbnails
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Programming the intermediate
Intermediate position I
Intermediate position I is any roller shading solution position
of your choosing, situated between the upper and lower limit
positions. Both limit positions must be set before the inter-
mediate position I is set.
Intermediate position I is approached from the upper limit
position.

Setting the intermediate position I

Move the shading solution from the upper limit position to the desired interme-
diate position I.
Press the STOP button and, within 3 seconds, also press the DOWN button
and hold the two buttons down.
▻ The sun protection shifts to confirm.
► The intermediate position I is now saved.

Checking the intermediate position I

Press the DOWN button twice within one second.
► The shading solution runs to the intermediate position I.

Deleting the intermediate position I

Travel the shading solution to the intermediate position I.
Press the STOP button and, within 3 seconds, also press the DOWN button
and hold the two buttons down.
▻ The sun protection shifts to confirm.
► The intermediate position I is now deleted.
28 - en
positions I + II

Advertenties

Inhoudsopgave
loading

Gerelateerde Handleidingen voor Becker Centronic VarioControl VC470-II

Gerelateerde Producten voor Becker Centronic VarioControl VC470-II

Inhoudsopgave