Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GROUNDING CABLE
Use earth clamp to connect earth cable with work piece.
MIG GUN
The welding wire is driven through the welding cable and MIG gun to the
work piece. It is attached to the drive system.
POWER SWITCH
In the "OFF" position no power is being supplied the "ON" position power is
supplied to the main transformer and control circuit.
INPUT POWER CORD
The power cord connects the welder to the 230 volt power supply. 14 amp
receptacle to supply power to the welder.
TORCH POLARITY CHANGE CABLE
To change the polarity of gun for kinds of core wire welding.
NAMEPLATE OF WELDER
The nameplate indicate the main electrical data of welder.
3. Machine panel
1.
LCD: Shows all process from function selection to welding.
2.
LEFT ADJUST KNOB: Allows user to adjust the current and wire feeding
speed accurately.
3.
RIGHT ADJUST KNOB:: Allows user to adjust the voltage accurately.
4.
Home Key: Keep pressing home key, return to home page
5.
Multi-function adjusting knob: For function selection; Press for confir-
ming.
6.
Return: Return to the previous step.
2
ENG
44
3
1
4
5
6
Advertenties
Inhoudsopgave
