Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2.
Push the thermostat knob for 2 sec. (fig.A). The display will show « Turbo SF System Activated » and a
sound signal will be heard.
3.
On the display following text will flash « Melting Solid Fat » (14).
4.
Make some holes till the heating element with a wooden spoon in the fat (fig. G).
5.
Push the thermostat knob to confirm (fig. C). The red lamp (fig.D) lights up and the fat will start melting.
Caution: if you do NOT push the thermostat knob within the 15 sec. the display will return to the previous
setting.
Caution: NEVER leave the deep fryer unattended whilst working. When the fat is liquid, switch off the
appliance and pull the plug. First remove the basket and then the control panel. Pour the melted fat
carefully in a receiver.
6.
Don't throw the fat away but bring it to the container park or a collection point.
7.
Now clean the deep fryer: see point 4.3.
8.
To add new frying fat: see point 3.1.2.
4.2. Changing the frying oil
1.
Let the frying oil cool down to at least room temperature.
2.
First remove the basket and then the control panel. Carefully pour the oil in a recipient.
3.
Don't throw the fat away but bring it to the container park or a collection point.
4.3. Cleaning
1.
Remove the plug and let the deep fryer completely cool down before disassembling it. First remove the
basket, then the control panel with heating element and then the bowl.
2.
-NEVER immerse the control panel in water or any other liquid. Only clean it with a damp cloth.
-Stainless steel housing, stainless steel lid and stainless steel bowl can be cleaned in the dishwasher or in hot
water with detergent. Nevertheless, we recommend to clean the stainless steel parts in hot water with
detergent, considering the aggressive detergents used in the dishwasher may affect the shine of the stainless
steel.
-Synthetic housing and synthetic lid can both be cleaned in the dishwasher or in hot water with detergent.
-Important: the painted metal housing and painted metal lid need to be cleaned in hot water with detergent.
In the dishwasher a discoloration may occur due to the aggressive chemicals used in the cleaning products.
-NEVER clean the basket in the dishwasher, the aggressive detergents could cause rust. Clean it in hot water
with detergent with a washing-up brush. NEVER let the basket soak in the water to avoid rusting.
3.
If you want to clean your deep fryer quickly, easily and safely, we advise you to use the FRITEL cleaner for
fryers. Fill the bowl of the deep fryer with warm water at + 40°C and add about 10 caps of FRITEL cleaner for
fryers. The product must soak in for +/- 20 minutes, then empty the bowl. Rinse thoroughly and wipe with a
soft towel. The FRITEL cleaner for fryers contains natural enzymes. So it's environment-friendly,
biodegradable and non-toxic. The FRITEL cleaner for fryers can be applied to all materials like stainless steel,
synthetic, enamel, etc.
5. TIPS IN CASE OF MALFUNCTIONS
If you observe one of the troubles below, do not use the appliance. Go through the following check-list:
1.
The control lamp flashes or the deep fryer cannot be switched on/off:
▪
Pull the plug and put it back in
▪
Try again
2.
No temperature lights up
▪
Turn the thermostat knob once again to the desired temperature (fig.B).
▪
Push the thermostat knob to confirm.
3.
The safety thermostat blows :
▪ Let the deep fryer cool down first, then press the reset buttons (16). The deep fryer is ready to be
used again.
4.
The deep fryer does NOT heat up :
▪ The safety thermostat is interrupted: Press the 2 reset buttons (16)
25
Advertenties
Inhoudsopgave
