Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION
Electrical connection
Warning!
All electrical work should be carried out by a
suitably qualified and authorised electrician.
No alterations or wilful changes in the elec-
tricity supply should be carried out.
Fitting guidelines
The cooker is manufactured to work with
three–phase alternating current (400V
3N~50Hz). The voltage rating of the cooker
heating elements is 230V. The appliance can
be configured for two phase power supply
(400V 2N~50 Hz) by bridging the appropriate
terminals according to wiring diagram. The
connection diagram is also found on the cover
of the connection box. Remember that the
connection wire should match the connection
type and the power rating of the cooker.
The connection cable must be secured in a
strain–relief clamp.
Warning!
Remember to connect the safety circuit to the
connection box terminal marked with
electricity supply for the cooker must have a
safety switch which enables the power to be
cut off in case of emergency. The distance
between the working contacts of the safety
switch must be at least 3 mm.
Before connecting the cooker to the power
supply it is important to read the information
on the data plate and the connection diagram.
. The
93
1
2
Advertenties
