OPERATION
Booster function "P"
The Booster Function increases the nominal
power of the ø 210 mm cooking zone from
2000W to 3000W,
ø 160 mm cooking zone from 1200W to
1400W.
Turn the knob to "P" position and hold it there
for 3 seconds. Cooking zone display will show
the letter "P".
To deactivate the Booster function turn the
knob to another position or simply lift the pot
off the cooking zone.
For 210 mm cooking zone, operation of the
Booster function is limited to 5 minutes.
Once the Booster function is automatical-
ly deactivated, the cooking zone continu-
es to operate at its nominal power.
The Booster function can be reactivated,
provided the appliance electronic circuits
and induction coils are not overheated.
When the pot is lifted from the cooking
zone when the Booster function is in
operation, it remains active and the co-
untdown continues.
When the appliance electronic circuits or
induction coils overheat when the Booster
function is in operation, it is automatically
deactivated. The cooking zone continues
to operate at its nominal power.
Two cooking zones arranged vertically
form a pair.
If activating Booster function causes
the overall power limit of a pair to be
exceeded, the heat setting of the other
cooking zone in a pair will be automati-
cally reduced.
Limiting the operating time
In order to increase efficiency, the induction
hob is fitted with a operating time limiter for
each of the cooking zones. The maximum
operating time is set according to the last
heating power level selected. If you do not
change the heating power level for a long time
(see table) then the associated cooking zone
is automatically switched off and the residual
heat indicator is activated. However, we you
switch on and operate individual cooking
zones at any time in accordance with the
operating instructions.
Cooking heat level
1
2
3
4
5
6
7
8
9
P
In order to conserve electricity, after 30
minutes heating setting "9" will be auto-
matically reduced to the heat setting "8",
but cook time will not change.
105
Maximum opera-
ting time (min)
480
480
300
300
300
90
90
90
90
10