Advertenties
ChamSys
Set heads 1 to 4 to 100% using keyboard
Set heads 1 to 4 @ 50%, all others at 0%
Select 2nd element from head 1>10 at 50%
Select 1st till 3th element from head 1>10 at 50%
PC Keyboard THRU = '>'
Set DMX channel 1-50 @ FULL
FX
Add FX
Convert chase to FX
Force Cue to have no FX
Playback
Step through Cue
Step back up Cue
Go to next step without time
Go back a step without time
Reassert Playback
Take manual control of Playback
Change chase / FX speed live
Go to Cue ID 2
Release Playback with 3 sec time
Release all Playbacks
Release all test Playbacks/Cues/Stacks
Enter/exit Blind with 3 sec time
Make Cue Stack default all pages
Transfer a Cue Stack to other playback
Loading Values into the Programmer
Default all attribs
Default position attribs
Default colour attribs
Default beam attribs
Default intensity attribs
Make active all atttribs
Make active pos attribs
Make active colour attribs
Make active beam attribs
Make active int attribs
Load Cue from Playback
Load Cue ID 2
Load Cue at 40%
Load Cue at current level
Load entire state of Cue
Load selected heads
Load from DMX
Load Hard Valus in Programmer
Snapshot output cues
Snapshot active values
Snapshot selected heads
Removing values from the Programmer
Clear all values
Clear with 3 sec time
Clear selected heads
Clear to default vals
Clear to zero value
Remove attrib
Remove attrib
Remove position attribs
Remove colour attribs
Remove beam attribs
Remove intensity attribs
Remove all attribs
Make attrib hard value
Make attrib hard value
Make position attribs hard value
Make colour attribs hard value
Make beam attribs hard value
Make intensity attribs hard value
Make all attribs hard value
AUDIO VISUAL LIGHTING bvba, D'Helst 21, 9280 Lebbeke, Belgium
Tel 052-41.29.24 Fax 052-41.25.30 E-mail: info@avl.be
MagicQ Gebruikershandleiding
Pagina 425 van 520
1 > 4 @ #
1 > 4 @ 50 - -
1>10.2 @50
1>10.1>3 @50
FULL = '#'
*1-50@FULL
Select heads, FX <ADD FX>
CUE STK <SHIFT + Make FX>
Select heads <Add FX 0 Size>
>
|| (also SHIFT + >)
>>
<<
<<S> + FLASH button>
<S + move manual fader>
<S + turn encoder X>
<S> 2 ENTER
<S> 3 <REL>
SHIFT + RELEASE
CTRL + RELEASE.
3 <BLIND>
Change to Page 1, PLAYBACK, <Default Cue Stack>
(soft button D)
SHIFT + SEL – select source – select target
Select heads, LOCATE
Select heads <POS + LOCATE>
Select heads <COLOR + LOCATE>
Select heads <BEAM + LOCATE>
Select heads <INT + LOCATE>
Select heads, <* + SET>
Select heads, <POS + SET>
Select heads, <COLOR + SET>
Select heads, <BEAM + SET>
Select heads, <INT + SET>
INC <S>
2 INC <S>
@ 40 INC <S>
@ INC <S>
ALL + INCLUDE
<SHIFT + INC> <Selected Only> <S>
Select heads, <CTRL + INC> ENTER
+ INC
PROG, <Snapshot>
THRU RECORD
* + SET
CLEAR
3 CLEAR
Select heads, SHIFT + CLEAR
CTRL + CLEAR
SHIFT + CTRL + CLEAR
<REMOVE + turn encoder>
<soft button + REMOVE>
<POS + REMOVE>
<COLOR + REMOVE>
<BEAM + REMOVE>
<INT + REMOVE>
<* + REMOVE>
<INCLUDE + turn encoder>
<soft button + INCLUDE>
<POS + INCLUDE>
<COLOR + INCLUDE>
<BEAM + INCLUDE>
<INT + INCLUDE>
<* + INCLUDE>
- © Copyright AVL 2008-2018 -
Versie 1.7.9.3
Website: www.avl.be
Advertenties
