Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Cleaning and maintenance
➤ If you wish to drain the thawed water through a hose:
Connect a hose with an inside diameter of 6 mm to the outlet port (fig. 9 2,
page 5).
➤ Remove the drain plug (fig. 9 1, page 5).
➤ The thawed water now drains off through the hose.
➤ Wipe the refrigerator dry with a cloth after thawing.
Switching off and storing the device
If you do not intend to use the device for a prolonged period, proceed as follows:
➤ Disconnect the connecting cable from the battery.
➤ Clean the device (see chapter "Cleaning and maintenance" on page 16).
➤ Set the lock to the "VENT" position (see chapter "Removing the transport protec-
tion" on page 12).
This prevents odours from forming.
Securing the cabinet door
You can prevent the cabinet door from being opened inadvertently.
➤ Put the locking mechanism on the top of the door to position 1 (fig. 6 1,
page 4).
8
Cleaning and maintenance
A
NOTICE!
Do not use abrasive cleaning agents or hard objects during cleaning as
these can damage the device.
➤ Clean the device regularly with a damp cloth once it becomes dirty.
➤ Make sure that no water drips into the seals. This can damage the electronics.
➤ If necessary, wipe up the condensation that has gathered on the floor.
➤ Wipe the device dry with a cloth after cleaning.
16
MR07, MRR07, MH07
EN
Advertenties
Hoofdstukken
Inhoudsopgave
