Advertenties
Visual Data Manager
<
English
!
#
Appendix
Additions from V2.40
Programme GLU100A and GLU000A
Safety notes
Hint!
The following software changes will only be supported by our 32 Bit operating and read
out software from version V1.3.0.0 and not by the 16 Bit operating and read out software!
Warning!
If PC-software older than V1.3.0.0 is used this could lead to data loss!
Digital inputs
• Delay time
In function On/off events a time delay can be set that sets the delayed reaction time
on the digital high state change.
• External switch
So long as the digital value condition is high a relay or OC can be switched.
• Control input
The following activities can be selected in the Control input function:
limit monitor is only active once the digital input is high.
Store curve
After selecting this activity measured values
are stored whilst the digital input is high.
Signal analysis aktive
After selecting this activity an analysis (min,
max, average values, quantities and
integration) is run when the digital input has
changed to high.
Limits aktive
After selecting this activity the alarm set point
I
Advertenties
Hoofdstukken
