Making Air Inlet And Outlet Vents - Dometic 10 Series Montagehandleiding
Verberg thumbnails
Zie ook voor 10 Series:
- Gebruiksaanwijzing (128 pagina's) ,
- Montagehandleiding (104 pagina's) ,
- Montagehandleiding en gebruiksaanwijzing (96 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
RML10.4, RML10.4S, RML10.4T
Select one of the three versions for draft-proof installation (fig. 7, page 6):
Stop bar behind the fridge (A)
➤ Glue a flexible sealing lip (1) to a stop bar (2) behind the refrigerator (3).
➤ Push the refrigerator-oven combination against the stop bar with the flexible seal-
ing lips.
✓ The space behind the refrigerator is sealed to the interior of the vehicle.
Side gap distance of up to 5 mm between refrigerator and furniture (B)
➤ Glue the sealing lips (see chapter "Accessories" on page 14) on the side of the
furniture (4).
➤ Push the refrigerator-oven combination against the flexible sealing lips on furni-
ture.
✓ The space behind the refrigerator is sealed to the interior of the vehicle.
Side gap distance of 5 mm to 10 mm between refrigerator and
furniture (C)
➤ Glue the double lipped sealing (see chapter "Accessories" on page 14) on the
side of the furniture (4).
➤ Push the refrigerator-oven combination against the double lipped sealing on fur-
niture.
✓ The space behind the refrigerator is sealed to the interior of the vehicle.
4.3
Making air inlet and outlet vents
I
NOTE
• Deviations from the inlet and outlet variations shown here must be
approved by the manufacturer.
• At high ambient temperatures, the refrigerator can only provide its
maximum cooling capacity if the optimum ventilation has been pro-
vided.
➤ Make an air inlet vent and an air outlet vent in the outer wall with the size of
– LS230: 315 mm x 373 mm
– LS330: 249 mm x 410 mm
When doing so, observe the information, see chapter "Preparing the installa-
tion" on page 15.
EN
Installing the refrigerator
17
Advertenties
Hoofdstukken
Inhoudsopgave
