Advertenties
Beschikbare talen
Beschikbare talen
When the mower is mowing
In "manual" mode, the mower works until the lawn is
mowed . Mowing is interrupted only for charging the
battery . When the lawn area is mowed, the mower
returns to the docking station .
In the programmable "Calendar" mode or with the
Honda "Smart Timer" calendar function, the mower
operates continuously for a set period of time . Mowing
is interrupted only for charging the battery . If the lawn
area is mowed before the time period expires, the mower
returns to the dock .
To stop mowing prematurely, press the Dock button in the
Honda Mii-monitor App . You could also send the mower
back to the docking station by pressing the confirm
button H* on Miimo to confirm" .
Energy saving mode
The mower reduces its energy consumption by
automatically switching off the power in the perimeter
wire when it is not mowing and not being charged .
To wake up the mower remotely from the energy
saving mode, press "Mow" in the Honda Mii-monitor
App . When a Calendar or the Honda "Smart Timer"
functionality becomes active, the wire signal will start up
automatically .
Mowing small lawn areas with "Place & Mow"
Place & Mow is intended for mowing small areas that
require special treatment without having to mow the
whole lawn, such as the area under a piece of garden
furniture that has been removed . The mower is positioned
at the lower left corner of the intended area to mow
(see figure H) . The final mowed area depends on the
lawn conditions; it will not necessarily be an exact
square . After completion of "Place & Mow", follow the
instructions on the screen .
Note: For safety reasons, "Place & Mow" cannot be used
outside the perimeter wire .
Menu Navigation
The table below explains the various menu items available on Miimo . Most of these functions are also available on the
Honda Mii-monitor App .
Main Menu Sub-menu 1
Mow now
Smart Timer
Calendar
Calendar
Sub-menu 2
Explanation
Pressing the confirm button will send the mower to mow .
In "Off/Manual", the mower works until the display shows
"garden complete" .
In "Calendar" mode the mower will operate until the end of
the time period or until the display shows "garden complete"
(whichever comes first) .
The Honda "Smart Timer" function is optimised based on
the size of the lawn area and gives additional functionality to
connect to a local weather data provider .
In the default setting, the mower does two full cuts a week and
starts at 8 am .
You can set up your Smart Timer schedule by using the free
Honda Mii-monitor App .
Edit (selected day)
Program a mowing schedule by setting individual mowing days
and slots (up to 2 per day) .
Don't mow/Delete slot This will delete the corresponding slot for the selected day .
The number of full cuts per week for the actual schedule are
shown at the bottom of the display .
Sensors
The mower is equipped with the following sensors:
– The lift-up sensor is activated when the mower is
lifted .
– The rollover sensor detects when the mower tips over .
– The tilt sensor is activated when the mower reaches a
slope angle of 32° .
When one of the sensors is activated, e .g . the lift-up
sensor, the drive motors and cutting blades are stopped .
A message is indicated in the display, e .g . "lift-up" .
– The obstacle sensor detects objects/obstacles
alongside the entire front edge of the mower and
causes a change of direction .
Battery charging
The battery is equipped with temperature monitoring that
al-lows charging only if the battery internal temperature
is in the range between 5 °C and 45 °C .
The lithium-ion battery is supplied partially charged . It is
recommended to charge the mower during installation of
the perimeter wire in the docking station .
The lithium-ion battery can be charged at any time
without reducing its service life . Interrupting the charging
procedure does not damage the battery .
When the battery is run flat or discharged, the mower is
shut off by means of a protective circuit: the blades no
longer move .
English | 11
Advertenties
Probleemoplossen
