Setting the cooking zones
1.
Touch the knob for the cooking zone to be set and adjust it to setting 4. Repeat
for all four zones. When using all four cooking zones, setting 4 is the maximum
setting to which the product can be set for each zone. The total power of
3500W is distributed across the cooking zones.
2.
Press the power button to confirm the settings.
3.
When the cooktop is turned back on, the total wattage is adjusted.
Disable power management
1.
Remove the plug from the outlet temporarily.
2.
Plug the power cord back in but do not turn the product on.
3.
Briefly press the timer button and the lock button three times at a time until a '-'
appears next to each cooking zone. '-' means that the product is set to a total
power of 3500W.
4.
The product now switches back from power management and must be set for
each cooking zone. To do this, press the on/off button. '-' will appear next to
each zone.
Setting the cooking zones
1.
Touch the button for the cooking zone to be set and adjust it to setting 9.
Repeat for all four zones.
2.
Press the power button to confirm the settings. The product now turns off.
3.
When the product is turned on again, the total wattage has been adjusted.
5.8 overheating protection
The product contains a temperature sensor that monitors the temperature. When an
excessive temperature is measured, the product automatically stops working.
5.9 Detection of small objects
If a pan is too small or not suitable for induction, or another small object (e.g. a knife,
fork or key) is left on the product, the product automatically goes to standby after 1
minute. The fan will remain active for another 1 minute.
5.10 Automatic shutdown
The product includes automatic shutdown as a safety feature. The product
automatically turns off if you forget to turn off the cooking. The default times for
different power levels are shown in the table below.
Cooking mode
Standard shutdown after (hours)
46
1
2
3
4
8
8
8
4
5
6
7
8
4
4
2
2
9
2