Advertenties
Beschikbare talen
Beschikbare talen
5.4 Warm-up function
1.
Select the desired cooking zone by touching the corresponding box on the
control panel.
2.
Touch cooking level 1 twice. A "c" appears next to the cooking zone selection
button. This means that the cooking zone will keep up to 2 liters of water hot at
55 °C.
3.
To cancel the warming function, select the desired cooking zone and touch the
next desired cooking setting.
5.5 Pause function
• Touch the pause button to temporarily stop the cooking zones from heating. All
displays will show "P." At this time, only the pause button and on/off button can
be operated.
• Touch the pause button again to deactivate the pause function. The displays
show the original setting and the cooking zones continue with the preset cooking
setting.
5.6 Locking
You can lock the control panel to prevent unintended use. When the lock is enabled,
you can only use the lock button and the power button.
Lock
Press the lock button. The timer display indicates "Lo."
Unlock
1.
Make sure the product is turned on.
2.
Press and hold the lock button for a few seconds.
3.
You can now use the product.
5.7 Power management
Enable power management
The product can be set to 7400W (2-phase) or 3500W (1-phase) total power. By
default, the product is set to 7400W. Follow the following steps to adjust it to
3500W.
1.
Remove the plug from the outlet temporarily.
2.
Plug the power cord back in but do not turn the product on.
3.
Briefly press the timer button and the lock button three times at a time until an
'n' appears next to each cooking zone. 'n' means the product is set to a total
power of 7400W.
4.
The product now switches to power management and must be set for each
cooking zone. To do this, press the on/off button. '-' will appear next to each
zone.
English
45
Advertenties
Hoofdstukken
Probleemoplossen
