Advertenties
Beschikbare talen
Beschikbare talen
ATTENTION:
If the hob is connected in accordance with connection diagram A2, it is required that
a certified installer checks that the technical installation in the meter cupboard, the
connection in the hob, and the connection cable still meet current standards and are
consistent with the information in the connection diagrams.
ATTENTION!
◊ Safe operation is only ensured if the installation complies with the supplied
installation instructions and is done correctly. Any case of damage resulting from
improper installation is the responsibility of the installer.
◊ Only qualified electricians may make electrical connections, in compliance with
national and local safety standards.
◊ The hob falls under protection class I and requires connection to an earthed
network. The supplier disclaims any liability for damage if caused by inadequate
electrical supplies.
◊ The hob must be installed in a fixed arrangement with the appropriate
disconnecting mechanisms as prescribed.
◊ An induction hob should only be placed above objects such as a drawer, vented
oven or dishwasher, maintaining the prescribed space for ventilation. Placement
over refrigeration equipment, non-ventilated ovens or washing machines is not
permitted.
◊ Make sure the power cord does not pinch during installation or run along sharp
edges. If installed above an oven, route the cable along the back corners to the
connection point. This should be positioned to avoid contact with hot parts.
◊ The connection point, outlets and/or plug must always be accessible.
◊ The worktop on which the hob is installed must be flat, level and solid. Please
follow the instructions of the worktop manufacturer.
◊ Warranty is void in case of incorrect installation, connection or installation.
◊ ATTENTION! Any adjustment to the appliance, including installation and
replacement of the power cable, must be carried out by a certified installer.
English
41
Advertenties
Hoofdstukken
Probleemoplossen
