Inhoudsopgave
Advertenties
EN
Maintenance
Adjusting the water temperature
The water temperature can only be adjusted
on Geberit washbasin taps with a mixer or a
thermostatic mixer.
If a mixer is used, a specific mixing ratio
between hot water and cold water is set. If a
thermostatic mixer is used, a constant water
temperature is set.
1
Detach the cover plate. → See figure
sequence
2
Adjust the water temperature on the mixer or
thermostatic mixer. → See figure sequence
2
, page 324.
3
Test the water temperature.
4
Mount the cover plate. → See figure
sequence
Activating cleaning mode
To clean the washbasin tap and the washbasin, the
flush actuation can be suppressed for a few
minutes.
▶
Activate cleaning mode with the Geberit
app, Geberit Service Handy or Geberit
Clean Handy.
Cleaning intervals
The following tasks must be carried out when
necessary or at the specified intervals at the latest.
Task
Cleaning the tap housing
Cleaning the tap aerator
Cleaning the basket filter
20
1
, page 322.
6
, page 329.
Interval
Weekly
Monthly
Yearly
Cleaning the tap housing
ATTENTION
Surface damage caused by aggressive and
scouring cleaning agents
▶ Never use aggressive cleaning agents that
contain chlorine or are acidic, abrasive or
corrosive.
Prerequisite
– Cleaning mode is activated.
1
Clean the tap housing with a soft cloth and a
mild liquid cleaning agent.
2
Dry the tap housing with a soft cloth.
Cleaning the tap aerator
Prerequisite
– Cleaning mode is activated.
1
Remove the tap aerator using the
maintenance key.
2
Clean the tap aerator and, if necessary,
descale.
81064795304430731 © 02-2022
970.664.00.0(01)
Advertenties
Inhoudsopgave
