Inhoudsopgave
Advertenties
transport from the manufacturer to the retail location. Therefore,
please charge the rechargeable battery
Rotate the solar cell housing
shade
(see Fig. A).
5
Slide the ON / OFF switch
Insert the solar cell housing
tighten by turning it clockwise (see Fig. E).
The rechargeable battery
cell
depends on the intensity of the sunlight and the angle
2
incidence of the light on the solar cell
as perpendicular as possible to the angle of incidence of the
light. In this way you will receive the highest light levels. Replace
the rechargeable battery
after charging (see "Replacing the rechargeable battery").
Preparing for use
Note: The solar cell
motion sensor
3
The "ON" position for the ON / OFF switch
the following functions:
If the orientation light is constantly lit up, it will automatically switch
on or off once the solar cell
long operating life, the LEDs will not be fully powered in this setting.
If the rechargeable battery is fully charged, the charge will be suf-
ficient for approx. 8 hours of lighting (see Fig. G). As soon as the
motion sensor
3
particularly bright light (see Fig. H). While the particularly bright
light is switched on, the LEDs will be run at full power. Approx. 40
seconds after the last movement has been detected, the product
will return to functioning as a constantly lit-up orientation light.
4
1
4
9
if the light output does not improve
9
also works as a twilight sensor, while the
2
only responds to movement.
detects dusk or dawn. To ensure a
2
detects movement, the product will switch to
before the first use.
9
anticlockwise out of the lamp
to the "ON" position.
into the lamp shade
charging period using the solar
. Place the solar cell
2
and
5
2
features
1
GB/IE
25
Advertenties
Hoofdstukken
Inhoudsopgave
