EINHELL 34.130.60 Originele Handleiding pagina 27
Verberg thumbnails
Zie ook voor 34.130.60:
- Originele handleiding (126 pagina's) ,
- Originele handleiding (120 pagina's)
Inhoudsopgave
Advertenties
All manuals and user guides at all-guides.com
10. Troubleshooting
Fault
The motor fails to
a) The capacitor is defective
start
b) The connectors have become
c) The mower is standing in high
d) The mower housing is clogged
e) Safety plug is not inserted
f) Battery is not correctly inserted
The motor perfor-
a) The grass is too high or too damp
mance drops
b) The mower housing is clogged
c) The blade is severely worn
d) Battery performance decrea-
Cutting is irregular
a) The blade is worn
b) Wrong cutting height
Notice! For protection, the motor is equipped with a thermal switch which cuts out when the
motor is overloaded and switches on again automatically after a short cooling period
Anl_GE_CM_36_Li_SPK13.indb 27
Anl_GE_CM_36_Li_SPK13.indb 27
GB
Possible causes
separated from the motor or the
capacitor
grass
sing
- 27 -
Remedies
a) The mower housing is clogged.
Have repaired by the Customer
Service Center
b) Have repaired by the Customer
Service Center
c) Start in low grass or on an area that
has already been mowed; change
the cutting height if necessary
d) Clean the housing so that the blade
moves freely
e) Insert safety plug (see 6.)
f) Remove the battery and reinsert
(see 5.)
a) Correct the cutting height
b) Clean the housing
c) Replace the blade
d) Check the battery performance
and charge the battery if necessary
(see 6.)
a) Replace or resharpen the blade
b) Correct the cutting height
14.09.2021 12:48:06
14.09.2021 12:48:06
Advertenties
Inhoudsopgave
