Inhoudsopgave
Advertenties
Problem
Possible Cause
The extension pole or the
Internal linkage not disengaged
cutting head cannot be re-
moved
Excessive heat from the
Excessive usage
motor
Clogged ventilation slots
Lubrication required
Excessive noise/vibration
Machine is defective
360° trigger cannot be
Defective 360° trigger
turned or pushed/pulled
Machine works intermit-
Battery not fully connected
tently
Machine is defective
Machine does not work
Battery charge is too low
Battery not fully connected
Machine/battery is defective
Maintenance and Service
Maintenance, Cleaning and Storage
Before any work on the garden product itself (e. g.
u
maintenance, tool change, etc.) as well as during
transport and storage, remove the battery from the
garden product. There is danger of injury when uninten-
tionally actuating the trigger.
For safe and proper working, always keep the product
u
clean.
Use a damp cloth to clean the blade after use.
To ensure safe and efficient operation, always keep the
product and the ventilation slots clean.
It is recommended to apply lubricant spray before and after
use. Do not inhale aerosols from lubricant spray. Apply in a
well ventilated area.
Never spray the product with water.
Never immerse the product in water.
Store the product in a secure, dry place, out of the reach of
children.
Keep all nuts, bolts and screws tight to ensure safe working
with the product.
Inspect the product and replace worn or damaged parts for
safety.
Ensure replacement parts fitted are Bosch-approved. Do not
modify any components on the machine.
Battery Maintenance
Use the following procedures to enable optimum usage of
the battery:
– Protect the battery against moisture and water.
– The battery must not be stored within the product but
stored separately.
– Do not leave the battery in the product in direct sunlight.
– The ideal storage condition for the battery is 5 °C.
– Occasionally clean the venting slots of the battery using a
soft, clean and dry brush.
Bosch Power Tools
Corrective Measure
Ensure the Twist lock (4) is pulled up during re-
moval
Allow machine to cool down
Remove the dirt
Apply recommended lubricant spray
Contact Service Agent.
Contact Service Agent
Remove the battery and reinsert it.
Contact Service Agent.
Recharge battery.
Remove the battery and reinsert it.
Contact Service Agent.
A significantly reduced working period after charging indic-
ates that the battery is used and must be replaced.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
transport the batteries by road without further require-
ments.
When the batteries are shipped by third parties (e.g. air
transport or forwarding agency), special requirements on
packaging and labelling (e.g. ADR regulations) must be met.
A dangerous goods expert must be consulted when prepar-
ing the items for shipping.
English | 29
F 016 L94 807 | (25.09.2024)
Advertenties
Inhoudsopgave
