Inhoudsopgave
Advertenties
Mowing tips
MOWING TIPS
Cutting height at a constant 3 - 6 cm, do not
mow off more than half of the lawn height.
Adjust the mowing times accordingly.
If the motor speed drops noticeably because
of thick grass, increase the cutting height and
mow in several passes.
To allow the performance of the
Robolinho to be exploited to the full, we
recommend having the automatic lawn-
mower mow the lawn during cool times
of the day.
DANGER!
Danger of injury due to the cutting bla-
des!
Before all maintenance and care
jobs, always switch off the automatic
lawnmower using the [ON/OFF key].
Disconnect the transformer of the
base station from the mains.
Always wear work gloves when per-
forming maintenance and care jobs
on rotating and/or cutting tools!
SETTING THE CUTTING HEIGHT
1. Select [Setting the cutting height].
2. Select [Cutting height] with the [arrow keys]
(3-3) in 5 mm steps and confirm with the [mul-
tifunction key right] (3-5).
3. Confirm the selection with the [menu key]
(3-8) and return to the main menu.
The blade plate does not move to the set
cutting height until the Robolinho starts
to mow.
The cutting height varies in the range
from 3 - 6 cm lawn height. It can be ad-
justed in five steps of 5 mm each.
BATTERY
The integrated battery is partially charged on
delivery. During normal operation, the battery
of the Robolinho is regularly recharged.
When the battery charge reaches 0%, the
Robolinho automatically returns to its base
station in order to charge the battery.
Interrupting charging does not damage
the battery.
455136_d
The base station is equipped with an elec-
tronic control unit with a monitoring function.
This automatically terminates the charging
procedure when a 100% charge status is re-
ached.
The battery status is shown on the display.
Make sure the charging contacts (10-1) of the
base station have adequate contact with the
contact surfaces (10-2) on the Robolinho.
The temperature range for charging should
be between 0 and 40 °C.
The built in protection circuit prevents the
battery from being charged at temperatures
above 45 °C, in order to prevent irreparable
damage to the battery.
If the operating time of the battery is reduced
in spite of it being fully charged, have the bat-
tery replaced by a new genuine battery. This
task should be carried out by an AL-KO dea-
ler, technician or service partner.
If the battery charge level has dropped be-
low the threshold set by the manufacturer as
a result of ageing or excessively long storage,
this means it cannot be recharged any longer.
Have the battery and the monitoring electro-
nic control unit checked by an AL-KO dealer,
technician or service partner, and renew it if
necessary.
The battery status is shown on the display.
Check the battery status after about 3 months
by switching on the Robolinho and reading off
the battery status. If necessary, place it in the
base station for charging.
In case of leakage of electrolyte must be rin-
sed with water / neutralizer. In case of contact
with eyes, so a doctor should be consulted.
MAINTENANCE
CAUTION!
Before performing any maintenance
STOP button!
DANGER!
Danger of injury due to the cutting bla-
des!
During transport, always keep the cutting
blade plate facing away from your body.
35
Advertenties
Hoofdstukken
Inhoudsopgave
