Inhoudsopgave
Advertenties
Product overview
Keep hands and feet away from rotating
parts. Wait until the cutting blade stops!
The Robolinho is equipped with a safety sen-
sor. If the machine is lifted up, its motor and
cutting blades are stopped within 2 seconds.
After contact with an obstacle, the Robolinho
moves back, stops and changes its direction
of travel.
Regularly check the machine and base sta-
tion for damage.
Do not use a damaged machine or base sta-
tion.
PRODUCT OVERVIEW
The product overview (2) provides an overview of
the machine.
2-1 Charging contacts
2-2 Bumper
2-3 Deck
2-4 Operating panel (under cover flap)
2-5 STOP key
2-6 Front rollers (steering)
2-7 Blade plate
2-8 Drive wheels
2-9 Cutting blade
2-10 Clearer blade
2-11 Fastening screw
DESCRIPTION OF FUNCTION
The Robolinho is a fully automatic, bat-
tery-operated lawnmower which moves freely
within a defined mowing area.
The mowing area is defined by a boundary
cable that is connected to the base station.
In order for its battery to be recharged, the
Robolinho moves along the boundary cable
into the base station.
455136_d
Mowing programs are pre-installed for mo-
wing, and also include the lawn and edge mo-
wing function. These mowing programs can
be changed.
The special arrangement of blades means
that the mown grass is not gathered up but
remains on the lawn between the stalks of
grass. As a result, it has a mulching or fertili-
sing effect.
SENSORS
The Robolinho is equipped with various safety
sensors (9).
Lifting sensor
If the Robolinho is lifted up by its deck during
operation, a sensor stops the blade within 2
seconds and switches off the travel drive.
Bump sensors and obstacle detection
The Robolinho is equipped with sensors that
ensure it changes its direction of travel if it
encounters obstacles. When it encounters an
obstacle, the top part of the deck (9-1) is shif-
ted slightly. This causes a sensor to trigger a
change in the direction of travel.
Tilt sensor in direction of travel
The Robolinho is switched off by the tilt sen-
sor if it encounters an upward or downward
slope of more than 35%.
Tilt sensor on side
The Robolinho is switched off by the tilt sen-
sor if it encounters sideways slopes of more
than 35%.
Rain sensor
The Robolinho is equipped with a rain sen-
sor that interrupts the mowing procedure in
case of rain, and ensures that the Robolinho
returns to its base station.
The Robolinho does not restart automa-
tically after being switched off by a safety
sensor. To restart, it is necessary to ack-
nowledge the fault by pressing the multi-
function key and rectifying the fault.
TRANSFORMER
The transformer generates the electricity for the
base station.
27
Advertenties
Hoofdstukken
Inhoudsopgave
