Inhoudsopgave
Advertenties
8. | Working with the Device
If the settings are correct, then all arrows light up green.
8. Confirm the setting with
The date and time of the adjustment are displayed next to the symbol.
9. Repeat steps 2-8 to test the second headlight.
8.7.8. Performing Adaptive Light Control Tests
Many modern vehicles have adaptive light control. In these systems, the light distribution of the headlights is automatically
adjusted to different conditions. To test these light systems, observe the instructions from different manufacturers.
NOTICE
Perform the headlight test on the left and right headlight respectively.
To perform a headlight test on headlights with an adaptive light system, proceed as follows:
1. Perform the steps 1 to 6 as described in section Performing Quick Tests [} 134].
2. Open the list under Adaptive light system via
3. Select >Yes<.
NOTICE
From software version 74 onwards, you can select the correct light distribution, e.g. for antiglare high beam,
with the manufacturer-specific name in the menu Adaptive light control or with the function Selection as-
sistant.
The following systems are included:
Audi HD Matrix
BMW High Beam Assist, BMW Spot Light DS Matrix LED Vision
Ford ILS (Intelligent Light System), Ford Matrix
Mercedes ILS (Intelligent Light System)
Peugeot Matrix Beam
Renault LED Matrix Vision
Skoda Matrix (Kink)
Tesla LED Headlight
VAG Matrix, VAG DLA (Dynamic Light Assist)
Use the Selection assistant function to select the required algorithm by using a comparison of the listed
graphics and information with the actual light distribution.
Hence you are able to check such light systems even if the vehicle is not in the database.
146
.
.
Hella Gutmann
SEG V
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
