Download Print deze pagina

Hilti TE 2-22 Originele Handleiding pagina 25

Generatie 03

Advertenties

Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame.
This can lead to explosions.
Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive
objects. This can damage the battery and also cause material damage and personal injury.
Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
Use only chargers and power tools approved for the specific battery type. Read and follow the
relevant operating instructions.
Do not use or store the battery in explosive environments.
If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly
visible and where there is no risk of fire, at an adequate distance from flammable materials. Allow
the battery to cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti
Service or read the document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion
batteries.
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by
scanning the QR code at the end of these operating instructions.
Description
1
Product overview
Dust cap
@
Tool holder
;
Function selector switch
=
Forward/reverse switch with transport
%
lock
Control switch
&
Grip
(
Intended use
The product described is a cordless SDS­Plus rotary hammer drill. It is designed for drilling in
masonry and for hammer-drilling in concrete and masonry.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum
performance, Hilti recommends the batteries stated in the table at the end of these operating
instructions for this product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
Items supplied
SDS­Plus rotary hammer drill, side handle, depth gauge, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or
at: www.hilti.group
Status indicators of the Li­ion battery
Hilti Nuron Li-ion batteries can indicate state of charge, fault messages and the battery's state of
health.
Indicators for state of charge and fault messages
WARNING
Risk of injury by a falling battery!
If the release button is pressed with a battery inserted in the product, subsequently check that the
battery is correctly re-engaged and secure.
*2266024*
25
2266024
Installation opening for accessories
)
Battery
+
Battery release button
§
Battery status indicator
/
Grip
:
Depth gauge
20

Advertenties

loading