Advertenties
What?
Clean the device.
Troubleshooting
What to do when something doesn't work...
DANGER! Exercise caution – risk of
injury! Unprofessional repairs may mean
that your unit will no longer operate safely.
This endangers you and your environment.
Error/Fault
Device does not work.
Tool holder does not turn.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
This appliance must not be disposed of with regular
household waste! Dispose of the appliance in the
appropriate manner. For more information, consult
your community waste disposal service.
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. The product can be returned free of charge
in accordance with the legal requirements, for exam-
ple through a municipal waste disposal company or a
dealer.
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
disposed of separately before disposal of the equip-
ment. Lithium batteries and rechargeable battery
packs of all systems are only to be handed in to the
waste collection points in a discharged state. The bat-
teries must always be protected against short circuits
by taping off the poles.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
cling.
How?
Wipe the unit with a damp
cloth.
Cause
Is the device defective?
Battery pack discharged?
Battery pack defective?
Is the rotation direction switch set
to the centre setting?
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Remedy
Contact your local vendor.
► Charging the battery pack – p. 29.
Contact your local vendor.
► Changing the rotation direction –
p. 30.
Technical data
Part number
Cordless drill set
Rated voltage
Idle revolutions
Max. torque
Max. drill chuck diameter
Sound power level (L
WA
Sound pressure level (L
Vibrations**
Weight
Battery charger
Rated voltage
Rated output
Charge voltage
Charge current
Protection class
Battery pack
Battery pack type
Rated voltage
• maximum
• nominal
Capacity
Charging time
*)
The noise emission values indicated have been measured according to a
standardized test method and can be used to compare one power tool with
another. The noise emission values indicated can also be used for a prelim-
inary assessment of the exposure. Warning: The noise emissions during the
actual use of the power tool may differ from the indicated values, depending
on the way in which the power tool is used, in particular what type of work-
piece is being machined. Safety measures must be defined to protect the
operator, based on an estimation of the vibration load during actual condi-
tions of use (taking into consideration all parts of the operating cycle, such
as time periods when the power tool is switched off and time periods when
it is switched on but running without a load).
Noise emission specifications according to the German Product Safety Act
(ProdSG) or the EC Machinery Directive: The sound pressure level at the
workplace may exceed 80 dB(A). If this is the case, the user must take noise
protection measures (e.g. wearing appropriate hearing protection and tak-
ing regular breaks).
**) The specified vibration emission value was measured in accordance with a
normed test procedure and can be used in order to compare one tool with
another. The specified vibration emission value can also be used for an
introductory evaluation of the exposure. The vibration emission value may
GB
196069
20 V
0–400 /
0–1400 min
35 Nm
13 mm
)*
77 dB(A)
(K = 5 dB(A))
)*
66 dB(A)
PA
(K = 5 dB(A))
< 3,2 m/s²
(K = 1,5 m/s²)
1,8 kg
230 V~, 50 Hz
70 W
20,9 V
2400 mA
II
Li-Ion
20 V
18 V
2 Ah
60 min
-1
31
Advertenties
Hoofdstukken
